HMC

HMC-Multifunctional control system for pumping stations

Description

  • HMC is a multifunctional system for controlling, monitoring and surveillance of pumping stations
  • HMC characterized by a flexible structure and high degree of modularity.
    Through individual configuration can be scheduled on almost every customer.
  • HMC is programmed and assigned parameters for various requirements in pumping stations
  • HMC not only can control pumps, also compressors, agitators and aerators can be easily integrated
  • HMC is configured individually, which is being introduced in the composition of the individual components on standard modules and standard software.
  • All parameterization and setting functions done on graphic display of logic modules, the surface of which is individually tailored to the design of the plant
  • RTUs any manufacturer manufacturers can be integrated
  • Depending on the customer switching devices of certain producers may be considered (eg. As soft starters, frequency converters)
  • System design in accordance with DIN EN 60439 VDE 0660 T500 -1

System Structure

HMC there is always the basic configuration of the modules:
(Depending on the requirements, the modules have different versions)
  • Supply module 
  • Motor starter module
  • Logic module
  • Level detection module
  • Alarm module
  • Housing module
Optionally, eg. The following components available:
  • Lightning protection, surge protection
  • Network Emergency feed
  • sub-distribution
  • network monitoring
  • seal monitoring
  • Bearing temperature monitoring
  • According to ATEX 100 (control of explosion-proof pumps)
  • Alarm forwarding via GSM modern

Technical specifications

Housing: sheet steel
Protection: IP44
dimensions:
from ca HxWxD: 800 x 500 x 210 mm
Operating voltage: 3x400V / N / PE; 50Hz
Control voltage: 24VDC
Regulations DIN EN 60439-1; VDE 0660 T500

Areas

Usable HMC is everywhere
  • where special requirements are made with respect to pump control, data acquisition and system configuration 
  • where a programmable logic controller (PLC) is required
  • where more than 2 pumps are to be controlled
  • where individual project is required by the customer's requirement
  • where services>30kW are expected

Logic Module

  • The logic module is the central control unit of the system. It consists of a freely programmable control relay with PLC features and a multifunction display for operation and display of the system status.
  • Up to 300 A output points will be realized.  The units are expandable and network.  On the display can texts, date, time, large / small numbers, graphics and Message texts are displayed, it is backlit and also at low temperatures still easy to read.
  • Operation is via the soft keys, an input-output unit for the coupling of digital and analog signals back attached to the device.
  • The specific configuration appear on the display only the project-related images.
    So the system always remains manageable and is easy to use.  It can be displayed up to 20 images.  The presentation can be done in different languages.
香港九龍新蒲崗四美街15號宏輝工業大廈10樓
10/F., Wang Fai Industrial Building, 15 Sze Mei Street, San Po Kong, Kowloon 
Tel: (852) 2700 9480          Fax: (852) 2700 9580
Email: info@hauken.com.hk